When the latest system or the newest version of an application on iPod touch is available, we always tend to update it so that we can enjoy a fresh service that the older version doesn't possess. However, the process may get failed at times and a white screen displays on our iPod when we are updating the devices. In this case, how do we fix this issue? Well, this article will present you five efficient methods to solve the problem of iPod touch white screen of death.
Part 1. Why the iPod touch shows white screen?
Before getting to following solutions, we should understand the reasons why iPod touch displays a white screen. Actually, two main causes can be used to explain it.
1. Software update or jailbreak failed. A common situation is that an iPod touch stuck on white screen when an error happens during updating or jailbreaking the iOS system.
2. Hardware issues. Another general circumstance is the link between the iPod Touch's screen and motherboard gets loose after it was dropped.
Part 2. How to Fix white screen of death on iPod touch with possible ways
Now firstly let's look at some possible solutions to work out iPod touch white screen with lines problem. Check as follows here please.
2.1 Charge your iPod touch
It is the first thing for you to charge your iPod touch when you see a white screen. You can complete this process by following steps.
Step 1: Make your iPod touch connected with a USB cable.
Step 2: Charge the device by plugging it to the wall power output. Otherwise, you can connect it to the computer.
Step 3: A lightning bolt that shows it is charging will appear. Please leave your iPod touch 4th generation charge for some minutes if there is a low battery reminder.
2.2 Force restart iPod touch
If your iPod touch is still unresponsive after trying out the first way, then a message that reads "I see Accessory Not Supported or Certified" will be displayed. Under this condition, you have to force restart the device. Do this while plugging iPod touch to power source or computer.
Step 1: Locate the Home button on iPod touch.
Step 2: Identify the Power button.
Step 3: Press Home and Power buttons simultaneously for a few seconds.
Step 4: The iPod touch will begin rebooting when the Apple logo appears.
2.3 Press Home + Volume Up + Power
If hard resetting your iPod touch doesn't do the trick in dealing with white screen of death, you can try another combination of buttons that may works. Here's the related steps.
Step 1: Find the Home, Power and Volume up buttons.
Step 2: Hold the three buttons at the same time till the device turns off and the Apple logo shows.
Step 3: Release them and your iPod touch will be restarted.
2.4 Restore the device through iTunes
At present, let us look at the fourth way to resolve iPod touch white screen with lines. That is restoring the device with iTunes. But this way will delete all settings and data on your iPod touch, so it's better to have your data backed up before you proceed in following steps.
Step 1: Open the latest iTunes.
Step 2: Use a USB cable to connect the iPod touch with iTunes.
Step 3: Tap the device after it is detected.
Step 4: Click Restore iPod button in Summary tab.
Step 5: Click Restore button when below notification pops up.
Part 3. How to solve iPod touch white screen with highest success rate
Above fixes to solve a white screen on iPod touch are with not complete guarantee, so you might be wondering whether there is a better fix to solve white screen death on iPod touch 4th generation with higher success rate. Of course, that is applying the third-party professional iOS system recovery tools like TunesKit iOS System Recovery. It is a relatively popular program to bring your iOS system back to normal with almost every problem solved. It fixes all iOS and tvOS system issues including iPod touch white screen with lines, iPhone grey screen, white Apple logo, ghost touch, Apple TV issues etc. Besides, there is no data loss after the reparation with standard mode. Finally, it supports diverse devices like iPhone, iPad, iPod touch and Apple TV, and all iOS versions, including the latest iOS 13. Want to get out of your trouble on iPod touch? Here's what to do.
Step 1: Firstly, open TunesKit iOS System Recovery for Windows on your computer. Then you have to connect your iPod touch till it's detected. Next, click "Start" button. Next, choose the "Standard Mode" and "Next". You have to select which device you've connected. Then follow the instructions from the interface and let your device is into DFU mode. After that, click "Next" button.
Step 2: The application will download the firmware package matched to your device after finishing the first step. Before that, check your device info if it is correct, including the model version, iOS version, etc. If all information is correct, click the "Download" and it will start downloading and verifying the firmware.
Step 3: When the firmware has been downloaded successfully, you just click the "Repair" button and the program will automatically begin to fix your iPod touch. Don't disconnect your device until the process is completed. Otherwise, the device might become bricked.
Part 4. Conclusion
These five ways can fix your iPod touch stuck at white screen issue. You can choose the one you would like and we sincerely hope that this article can be helpful for you. If you have other better alternatives or any problems in using above methods, please let us know and we will be very appreciated to help you.